Inhaltsverzeichnis
Werbung
White/black limiter
The white and black details can be limited independently.
Focus assist functions
The VF detail function and focus assist indicator function
facilitate focusing.
VF detail
Various functions are provided for the VF detail signal, which
can be added only on images on the viewfinder screen in order
to facilitate focusing in various situations: Functions for
coloring the VF detail signal, flickering the VF detail signal by
adding modulation, thickening the VF detail signal, and
changing the VF detail level according to the zoom position.
Focus assist indicator
The focusing level indicator on the viewfinder screen provides
a guide for focusing. The best focus setting can be easily
determined by observing fluctuation of the level indicator as a
guide.
Numerous viewfinder functions
Wide variety of viewfinder display options
Along with items such as operation messages, a zebra
pattern, a safety-zone marker, and a center marker, camera
settings may also be displayed on the viewfinder screen.
Furthermore, there are other indicators arranged above and
below the viewfinder, such as a tally lamp, battery warning
indicator, and an indicator to tell you that one or more settings
are other than standard. This makes it simple to check the
status of the camera.
Menu-based setting operation function
Selections and settings for viewfinder display items, a safety-
zone marker or center marker, screen size marker, etc. can be
made quickly and easily using setup menus displayed on the
viewfinder screen or an external monitor.
Wide variety of input/output interfaces
In addition to 3G/HD/SD-SDI output and HD/SD-SDI input,
HDC2500 features a wide variety of input/output interfaces,
including the following:
Network TRUNK function
The network TRUNK function (LAN port) allows for data
transmission between the camera and CCU at speeds of up to
1 Gbps. This allows for a multitude of new system
configurations, such as connecting several IP transmission
cameras as subcameras.
Note
The network TRUNK transfer rate differs depending on the
video format. Jumbo frames are not supported.
HD TRUNK function
The new HD TRUNK function uses 3G optical transmission to
send HD-SDI-equivalent digital data (not an HD-SDI video
signal) from the HDC2500 to an HDCU2000/2500.
6
Overview
Notes
• The HD TRUNK function can only be used when a single
format is selected and the network TRUNK function is set to
OFF.
• This function is only available for the genlocked signal.
HD prompter function
The new HD prompter function on HDC2500 supports sending
HD-SDI-equivalent digital data (not an HD-SDI signal)
separate from the return video signal from an HDCU2000/
2500 to the HDC2500.
Notes
• The HD prompter function can only be used when a single
format is selected and the network TRUNK function is set to
OFF.
• This function is only available for the genlocked signal.
User-friendly operation
Carbon-graphite outer cover
The HDC2500 outer cover is made of carbon graphite. Much
lighter and stronger than plastic, it can easily withstand intense
movement under the toughest shooting conditions.
Unit-body with low center of gravity
HDC2500, like the previous HDC1500 series, adopts a stylish
appearance with low-slung design. When used in combination
with the HDLA1500-series Large Lens
Adaptor, it permits the viewfinder to be mounted at a low
position, making the viewfinder position closer to the optical
axis of the lens.
Swing handle and VF slide mechanism
A slight protrusion of the upper front part of the handle enables
stable holding of the camera while you are shooting, by
holding the front part of the handle. Furthermore, the movable
range of a front-rear slide mechanism for the viewfinder
attachment has been widened to provide the best balance for
shooting with the camera on your shoulder. The swing handle
mechanism allows for mounting and usage on the HDLA1500
series, making forward shifting with a large-scale viewfinder
possible. This enables the same total longitudinal size as a
standard studio-use camera, for operability equivalent to that
of a standard studio-use camera.
Position-adjustable shoulder pad
The position of the shoulder pad can be adjusted for stable
shooting according to the build of the camera operator, the
type of lens in use, or the shooting style.
A low-repulsion shoulder pad (position fixed) is available as an
option (Part No.: A-8286-346-A).
Function-assignable switches
The function-assignable switches on the side panel can be
assigned to your desired function, such as electronic color-
temperature conversion.
These switches can be synchronized with the assignable
switches on viewfinder models such as HDVF-EL75 and
HDVF-C550W, and can be used to operate the viewfinder
functions such as MAGNIFICATION, etc.
Werbung
Inhaltsverzeichnis
