Inhaltsverzeichnis
Werbung
The following table describes the features of the Console Redirection screen.
Table 12. Server Management Console Redirection Details
System Information
The System Information screen provides the following information for the compute
module:
•
Board part number
•
Board serial number
•
Asset tag
•
BMC firmware revision
•
SDR revision
•
UUID
80
Setup Item
Options
Console
Disabled
Redirection
Network Serial
Console
Flow Control
None
RTS/CTS
Baud Rate
9600
19.2K
38.4K
57.6K
115.2K
Terminal Type
PC-ANSI
VT100
VT100+
VT-UTF8
Legacy OS
Disabled
Redirection
Enabled
Description
Console redirection allows a serial port to be used
for server management tasks.
If disabled the console redirection configuration
options will not be displayed.
If set to [Network Serial Console], console
redirection is enabled and the configuration
options will be displayed.
NOTE: Enabling this option will set Quiet Boot to
disable. The BIOS logo screen will not be
displayed during POST while console
redirection is enabled.
Flow control is the handshake protocol.
This setting must match the remote terminal
application.
[None] - Configure for no flow control.
[RTS/CTS] - Configure for hardware flow control.
Serial port transmission speed. This setting must
match the remote terminal application.
Character formatting used for console redirection.
This setting must match the remote terminal
application.
This option enables legacy OS redirection (that is,
DOS) on serial port. If it is enabled, the associated
serial port is hidden from the legacy OS.
®
Intel
Compute Module MFS5520VI User Guide
Werbung
Inhaltsverzeichnis
