Intel MFS5520VI Bedienungsanleitung Seite 101

Table 14. Exit Screen Details
®
Intel Compute Module MFS5520VI User Guide
Setup Item
Discard Changes and Exit
Save Changes
Discard Changes
Load Default Values
Save as User Default Values
Load User Default Values
Description
Exit the BIOS Setup Utility without saving
changes. A confirmation prompt will be
displayed before exiting Setup if any Setup
values were modified. The compute module will
not be rebooted. The [Esc] key can also be
used.
Saves changes without exiting the BIOS Setup
Utility. Saved changes may require the compute
module to be rebooted before taking effect.
Discards all changes made since the last save
change operation was performed without exiting
the BIOS Setup Utility. The <Esc> key can also
be used.
If Load Default Values is selected, the factory
default settings (noted in bold in the tables in
this chapter) are applied. The <F9> key can also
be used.
Saves current BIOS Setup Utility values as a
custom set of user-defined default BIOS values.
Note: Clearing CMOS or NVRAM will cause the
user default values to be reset to the factory
default values.
If Load User Default Values is selected, the
BIOS settings are restored to a previously saved
user-defined set of default values.
87