Tech Controllers R-8B Handbuch Seite 13

How to change the pre-set temperature
The pre-set zone temperature may be adjusted directly from R-8b room sensor using PLUS
and MINUS buttons.
During controller inactivity, the main screen displays current zone temperature.
After pressing PLUS or MINUS, the current temperature is replaced with the pre-set
temperature (the digits are fl ashing). Using PLUS and MINUS the user may adjust the pre-
set temperature value. After setting desired value wait for 3 seconds – after this time the
display shows a panel to defi ne how long the new setting should apply.
Time settings may be adjusted:
- permanently – press PLUS button until Con appears on the screen ( the pre-set value will
apply all the time regardless of schedule settings),
- for a specifi ed number of hours – press PLUS or MINUS until the desired number of hours
appears on the screen e.g. 01h (the pre-set value will apply for a specifi ed period of time;
after that the weekly schedule will apply).
- if the temperature value defi ned in the weekly schedule settings should apply, press
MINUS until the screen displays OFF.
13
R-8b