Introduction; Proper Use; Features And Equipment; Included Items - Parkside PFS 710 A1 Bedienungs- Und Sicherheitshinweis

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
V ~
Volt (AC)
W
Watts (Effective power)
Sabre saw PFS 710 A1
Introduction
Q
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. Further details can be found in the operating
instructions. Keep these instructions in a safe place. If
you pass the device on to anyone else, please ensure
that you also pass on all the documentation.

Proper use

Q
The device is intended for sawing, cutting to length
or trimming of securely supported objects made of
wood, plastic and building materials. The sabre
saw is suitable for rough sawing work, straight and
curved cuts and sawing flush. Please heed the in-
formation on saw blades and the advice on work-
ing with your saw. Any other use or modification to
the device shall be considered as improper use
and could give rise to considerable dangers. The
manufacturer will not accept liability for loss or
damage arising from improper use. The device is
not intended for commercial use.
6 GB
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children away from electrical
power tools!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Dispose packaging and appliance in
an environmentally-friendly way!

Features and equipment

Q
Oscillation speed setting wheel
1
Lock button
2
ON / OFF switch
3
Handle
4
Shoe
5
Saw blade
6
Quick-release chuck
7
Shoe adjustment lever
8
Carbon brushes cover
9
Unlocking button
10
Saw blade for wood
11
Bi-metal saw blade
12

Included items

Q
1 Sabre saw PFS 710 A1
1 Saw blade for wood HCS 152 mm
1 Bi-metal saw blade 156 mm
1 Operating instructions

Technical information

Q
Rated voltage:
Nom. power input:
Nom. no-load speed:
230 V ~ 50 Hz
710 W
n 0–2800 min
-1
0