Product Components - Hach Lange 2100AN Grundlegende Bedienungsanleitung

Figure 2 Back overview
1 Power cord connector
2 Fuse holder
3 Power switch
4 DB9 connector for RS232 cable

Product components

Refer to Figure 3 to make sure that all components have been received.
If any of these items are missing or damaged, contact the manufacturer
or a sales representative immediately.
5 Air purge fitting
6 Recorder output jack for a chart
recorder (0 to 1 V output)
7 Remote cable jack for flow valve
module connection to the automatic
flow cell (low pressure)
Figure 3 Instrument components
1 2100AN IS turbidimeter
2 Oiling cloth
3 Six 1" sample cells (30 mL) with
caps
4 Silicone oil
®
5 StablCal Calibration kit
1
Supplied with 4790100 only.
2
Do not remove the plastic wrapper from the paper rolls until the paper is
installed.
Installation
D A N G E R
Multiple hazards. Only qualified personnel must conduct the tasks
described in this section of the document.
®
6 Gelex secondary turbidity
1
standardization kit
7 Dust cover
2
8 Printer paper roll (2x)
9 Power cord
English 7