Disposal; Packaging; Troubleshooting - Silvercrest SBSB 3.7 A1 Bedienungsanleitung

9. Disposal

The battery integrated into this device must not be disposed of in house-
hold waste. The device must be disposed of properly with the battery
installed. When disposing of this device, the waste disposal facility re-
sponsible must be informed that the device contains an integrated bat-
tery.
This product is subject to the provisions of European Directive 2012/19/EC.
The symbol showing a wheelie bin crossed through indicates that the
product requires separate refuse collection in the European Union. This
applies to the product and all accessories marked with this symbol.
Products identified with this symbol may not be discarded with normal
household waste, but must be taken to a collection point for recycling
electric and electronic appliances. Recycling helps to reduce the con-
sumption of raw materials and protect the environment.

Packaging

When disposing of the packaging, make sure you comply with the environmental reg-
ulations applicable in your country.

10. Troubleshooting

If your device fails to function as required, please try this checklist first. Perhaps there is
only a minor problem, and you can solve it yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device yourself under any circumstances.
Fault
No function
The cutting performance is deteriorat-
ing.
44
GB
Possible causes / Action
• Has the device been connected to the pow-
er supply?
• Is the battery empty?
• Clean the blade attachment 2 and change
it if necessary.
Li-ions