Herunterladen Inhalt Inhalt Diese Seite drucken

Danger To Children - Silvercrest SBSB 3.7 A1 Bedienungsanleitung

Single-blade bartschneider
Vorschau ausblenden Andere Handbücher für SBSB 3.7 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DANGER to children

Packing materials are not children's toys. Children should not be allowed to play
with the plastic bags: there is a risk of suffocation.
Keep the device out of the reach of children.
DANGER to and from pets and livestock
Electrical devices can represent a danger to pets and livestock. In addition, ani-
mals can also cause damage to the device. For this reason you should keep ani-
mals away from electrical devices at all times.
DANGER! Risk of electric shock due to moisture
Protect the device from moisture, water drops and water splashes.
Never touch the device with wet hands.
The device and the power adapter must not be immersed in water or other liquids
and must not be rinsed under running water.
If the device has fallen into water, pull out the power unit immediately, and only
then remove the device from the water. Do not use the device again, but have this
checked by a specialist.
Should liquid enter the device, have it checked before starting the device up
again.
If the device is used in a bathroom, the power unit must be pulled out after use, as
the proximity of water represents a hazard, even when the device is switched off.
Installation of a residual current device (FI/RCD) with a rated residual operating
current of no more than 30 mA is recommended to provide additional protection.
Ask your electrician for advice. The installation should only be carried out by a
qualified electrician.
DANGER! Risk of electric shock
Never put the device into operation if there is any visible damage to the device or
the cable, or if the device has been dropped before.
Connect the cable to the device before plugging the power unit into a wall socket.
Only connect the power unit to a properly installed, easily accessible wall socket,
the voltage of which corresponds to the specifications on the rating plate. The wall
socket must still be easily accessible after connection.
Ensure that the cable cannot be damaged by sharp edges or hot surfaces.
Ensure that the cable is not trapped or crushed.
When removing the power unit from the wall socket, always pull the power unit
and never the cable.
37
GB

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis