Equipment Supplied - Denver Instrument Ir-35 Betriebsanleitung

The moisture analyzer consists of a
heating unit, a weighing system, and
a display and control unit. In addition
to the socket for AC power (mains
supply), it also has an interface port
for connecting peripheral devices,
such as a computer, printer, etc.
Storage and Shipping Conditions
Allowable storage temperature:
0 to 40°C; 32 to 104°F
Do not expose the moisture analyzer
unnecessarily to extreme tempera-
tures, moisture, shocks, blows or
vibration.
Unpacking the Moisture Analyzer
After unpacking the equipment,
please check it immediately for any
visible damage
If any sign of damage is visible,
proceed as directed under "Safety
Inspection" in the chapter entitled
"Care and Maintenance."
It is a good idea to save the box
and all parts of the packaging until
you have successfully installed
your equipment. Only the original
packaging provides the best protec-
tion for shipment. Before packing
your moisture analyzer, unplug all
connected cables to prevent damage.

Equipment Supplied

The equipment supplied includes the
components listed below:
– Moisture analyzer
– Power cord
– Pan support
– Pan draft shield
– 80 disposable aluminum sample
pans
– 1 pair of forceps
8
Installation Instructions
The IR-35 moisture analyzer is
designed to provide reliable results
under normal ambient conditions in
the laboratory and in industry. When
choosing a location to set up your
analyzer, observe the following so
that you will be able to work with
added speed and accuracy:
– Set up the moisture analyzer on
a stable, even surface that is not
exposed to vibrations, and level
it using the four leveling feet.
– Avoid placing the moisture
analyzer in close proximity to a
heater or otherwise exposing it
to heat or direct sunlight.
– Avoid exposing the moisture
analyzer to extreme temperature
fluctuations.
– Protect the moisture analyzer
from drafts that come from open
windows or doors.
– Keep the moisture analyzer
protected from dust, whenever
possible.
– Protect the moisture analyzer
from aggressive chemical vapors.
– Do not expose the equipment
to extreme moisture over long
periods.
– Make sure to choose a place where
excessive heat cannot build up.
Leave enough space between the
moisture analyzer and materials
that are affected by heat.