Display - Denver Instrument Ir-35 Betriebsanleitung

Display

The texts and symbols shown on
the display always have the same
meaning. The display is divided into
several areas.
Drying parameters/Adjustment function
Result
Function line
Busy symbol,
plus/minus sign,
standby symbol
Drying parameters:
The following symbols indicate
drying program parameters for infor-
mation, selection and configuration:
°
120
C Target temperature
40min
Drying time
A Fully automatic
g Weight unit or unit
for a calculated value
A Analysis start
2.0min Interval for automatic
output of intermediate
results
Adjustment function:
b
Adjustment function
Busy symbol, plus/minus sign,
standby symbol:
The
the moisture analyzer is processing
a function. The plus/minus sign
for the weight value or calculated
value appears here as well, and the
standby symbol when the device
Graphic
is switched off.
symbols
Result:
This section shows the weight or
Unit
calculated value.
Unit:
When the weighing system stabilizes,
the unit of measurement for the
weight or calculated value is dis-
played here.
Graphic symbols:
Which symbol is shown here
depends on the operating status of
the analyzer. The examples below
indicate "Please close hood," "Heat-
ing the sample" and "Please wait"
(hourglass).
Function line:
Press the Down/Back or Up/Forward
keys to move the focus and select
one of the functions shown here, and
the Enter key to activate the selected
function:
symbol is shown here when
J
15