Care And Maintenance - Denver Instrument Ir-35 Betriebsanleitung

Care and Maintenance

Repairs
Repair work must be performed by
trained service technicians. Any
attempt by untrained persons to
perform repairs may result in
considerable hazards for the user.
30
Cleaning
!
Make sure that no dust or liquid
enters the moisture analyzer
housing
!
Do not use any aggressive clean-
ing agents (solvents, abrasive
cleaning agents, etc.); clean the
moisture analyzer using a piece of
cloth which has been wet with a
mild detergent (soap) only
Disconnecting the power supply:
unplug the power cord from the wall
outlet (mains supply); if you have
a cable connected to the interface,
unplug it from the moisture analyzer
The pan draft shield and the pan
support can be removed for cleaning
Carefully remove any sample
residue/spilled powder using a brush
or a handheld vacuum cleaner
After cleaning, wipe down the
analyzer with a soft, dry cloth