Operating Design; Keys - Denver Instrument Ir-35 Betriebsanleitung

Operating Design

Operation of the moisture
analyzer follows a standard-
ized "philosophy" which is
described below. There is only
one key to a function; i.e.,
the key retains this function
throughout most of the menu
levels. The texts and symbols
shown always have the same
meaning.

Keys

Some of the keys trigger different functions, depending on whether you
press the key briefly or press and hold the key:
– Press briefly = hold the key down for less than 1.2 seconds
– Press and hold = hold the key down for more than 1.2 seconds
– If you press and hold longer than 1.2 seconds, the function triggered is
repeated every 0.6 seconds for as long as you hold the key.
Key Designation
e
On/off key
c
CF key
u
Enter key
y
Down/Back
key
x
Up/Forward
key
r
Print key
* When you switch off the moisture analyzer, it remains in the standby mode
14
Press briefly
Switch device on or off*
Analysis: cancel function
Menu: cancel selection
Analysis: trigger the selected
function (e.g., tare)
Menu: store the
selected setting
Analysis: select a
function (e.g., tare)
Menu: decrease value
or return to previous
selection
Analysis: select a
function (e.g., tare)
Menu: increase value
or go to next selection
Send readout value
or data record over
the interface port
IR 35
Press and hold
—
—
Menu: store the
selected setting and
exit the menu
Menu: decrease
value 10-fold
Menu: increase
value 10-fold
—