Denver Instrument IR-35 Betriebsanleitung Seite 9

Conditioning the Moisture Analyzer
Moisture in the air can condense on the
surfaces of a cold moisture analyzer whenever
it is brought into a substantially warmer place.
If you transfer the moisture analyzer to a
warmer area, condition it for about 2 hours at
room temperature, leaving it unplugged from
AC power. Afterwards, if you keep the moisture
analyzer connected to AC power, the constant
positive difference in temperature between
the inside of the equipment and the outside
will practically rule out the effects of moisture
condensation.
Setting Up the Moisture Analyzer
Position the components listed below in the
order given:
– Pan draft shield
– Pan support
– Disposable sample pan
9