HAPRO Luxura X10 Anleitung Seite 15

5
6
Qsens settings menu
1 Qsens init No
255
2 Init time
3
3 Delay 1
10
4 Timer 1
5
6
Qsens settings menu
2 Init time 255
3 Delay 1 3
4 Timer 1 10
5 Timer 2 100
5
6
Scroll to change the setting. ( 0 - 5 Sec. )
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
Timer:
Setting the time between switching on the compressor and switching on the water pump and nozzle
at the foot.
Select Timer 1. ( 4 )
Scroll to change the setting. ( 0 - 100 mSec. )
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
Timer 2:
Setting for the time between switching on the foot valve and the main valve.
Select Timer 2. ( 5 )
Scroll to change the setting. ( 0 - 200 mSec. )
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
- 15 -