HAPRO Luxura X10 Anleitung Seite 22

Coin settings menu
1 Relais puls 1
2 Direct on OFF
5
6
Other operating functions:
Note:
Once the air conditioning has been switched off, it must cool off for three minutes
before it can be switched on again.
Direct on:
This can be used when an external timer is used during the tanning session.
Select Direct on:
Scroll to change the setting.
On : In combination with an external timer, the session does not start until the 'Start' button is pressed.
Off : In combination with an external timer, the sunbed switches on as soon as the session starts.
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
Channel :
Volume :
Qsens :
Airco ( Optional) :
Bodycooler :
Facialcooler :
- 22 -
Press once: turns on Channel.
Four channels are available using the
(Optional: use channel 0 as mp3 channel.)
Channel will switch off after three seconds if there is no contact.
Press once: turns on Volume.
Adjustable to 13 settings using the
Press once: starts Qsens session.
Press once: stops Qsens session.
Press once: Air conditioning is (de) activated.
(if not included: Not Available)
Press once for three seconds: Air conditioning switches off.
Press once: Body cooler is activated.
Adjustable to 8 settings using the
Press once: Facial cooler is activated.
Adjustable to 8 settings using the
button.
button.
button.
button.