Specifications - Sony SVT-5050P Bedienungsanleitung

Specifications
General
Recording method Dual-head rotating helical scanning
system
Audio recording In 3-, 12-, and 24-hour modes
Tape speed 23.39 mm/sec (3-hour mode)
Specified video cassette tape
VHS 1/2 in. video cassette tape
Recording/playback time
3, 12, 24, 48, 72, 96, 120, 168, 240,
480, 720 and 960 hours (when
using E-180 tape)
Fast-forward/rewind time
Approx. 4 minutes (when using E-
180 tape)
Color system PAL color TV system
Video
Recording method Luminance signal: FM method
Color signal: Low-pass band-pass
Transformation direct recording
method
Input BNC: 1 Vp-p, BNC, 75 ohms
unbalanced
Output BNC: 1 Vp-p, BNC, 75 ohms
unbalanced
Horizontal resolution
Black & white mode: 350 lines or
more
Color mode: 240 lines or more
Audio
Input 315 mV (–7.8 dBs), phono jack
47 kilohms unbalanced
Output 315 mV (–7.8 dBs), phono jack
600 ohms unbalanced
Microphone input –60 dBs,
3.5 mm minijack,
600 ohms impedance
40
Connector
Alarm input Low level
Alarm output +5 V, 5.7 kilohms (Low active)
Switch output +5 V, 5.7 kilohms (Low active)
Tape end output +5 V, 5.7 kilohms (Low active)
Warning output +5 V, 5.7 kilohms (Low active)
Timer output +12 V, 5.7 kilohms (High active)
External timer input
Low level
Clock set output +5 V, 5.7 kilohms (Low active)
Clock set input Low level
Series output +5 V, 5.7 kilohms (Low active)
Series input Low level
One-shot input Low level
Alarm reset Low level
Remote control input
3.5 mm minijack
Other specifications
Operating temperature range
5°C to 40°C
Operating humidity range
80% or less
Power supply 220 – 240 V AC, 50 Hz
Power consumption
18 W
External dimensions
Approx. 420 × 100 × 340 mm
(w/h/d)
5
(16 /
8
Mass Approx. 5.8 kg (12 lb 9 oz)
Supplied accessory
AC power cord (1)
Optional accessory
SVT-RS1 Computer Interface Board
Design and specifications are subject to change
without notice.
× 4 × 13
1
/ in.)
2