One-Shot Recording - Sony SVT-5050P Bedienungsanleitung

One-shot Recording

Aside from long-term recording in time-lapse mode,
this unit is capable of one-shot recording, which has
applications with data files and animation.
7
1
Set the recording speed in this display window to
"000" by pressing REC/PLAY SPEED +/–.
H M S
2
Press MENU until the 1 SHOT SET display
appears on the screen.
3
Press REC/PLAY SPEED+/– to specify FIELD
(the number of fields) to be recorded during one-
shot recording and then press SHIFT $.
1 2
(Fields)
60
4
Press REC/PLAY SPEED+/– to set the one-shot
time in INTERVAL.
1M
(1 minute) (2 minutes)
5
Press SEARCH to return to the normal display.
6 2 3,5 1,
3-5
3 4 5
30 10
2M 3M
(3 minutes)
6
Press r REC.
The unit enters the recording pause mode. After
the interval to be set passes, one-shot recording
starts.
Recording the number of fields you set.
(ex. 4 fields)
One-shot input
To start one-shot recording immediately
Press r REC again or short-circuit the 1 SHOT IN
and COM terminals
to COM
To set the desired interval for one-shot
recording
When you short-circuit the 1 SHOT IN and COM
terminals, you can set the desired interval up to three
minutes. (However, the number of fields specified in
step 3 is recorded.)
In step 4 of the operations, set INTERVAL to the same
and longer interval than the one made by short-
circuiting 1 SHOT IN and COM terminals.
In step 6, short-circuit the 1 SHOT IN and COM
terminals after you have pressed r REC to start
recording.
Interval (ex. 1 minute)
to 1 SHOT IN
29