Activating/Deactivating The Handset; Activating/Deactivating The Keypad Lock - Siemens Gigaset S400 professional Bedienungsanleitung

Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / starting.fm / 06.07.2011

Activating/deactivating the handset

Activating/deactivating the keypad lock

Reverting to idle status
You can revert to idle status from anywhere in the menu as follows:
¤
Press and hold the end call key a.
or:
¤
Do not press any key: after 2 minutes the display will automatically revert to idle
status.
Settings that have not been saved by selecting the display keys
§Change§
are lost.
An example of the display in idle status is shown on page 15.
a
With the phone in idle status, press and hold the end call key (confir-
mation tone) to switch off the handset.
Press and hold the end call key again to switch the handset on.
Please note
When the handset is switched on, an animation showing the Gigaset logo is dis-
played for several seconds.
The keypad lock prevents any inadvertent use of the phone.
#
Press and hold the hash key in idle status to activate or deactivate the
keypad lock. You will hear the confirmation tone.
If the keypad lock is activated, you will see a message when you press a key.
The keypad lock deactivates automatically when you receive a call. It is reactivated
when the call is finished.
Please note
When the keypad lock is active, you cannot even call emergency numbers.
Using the phone
§OK§ §Yes§ §Save§
, , or
21