Setting The Date And Time - Siemens Gigaset S400 professional Bedienungsanleitung

Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / starting.fm / 06.07.2011
First steps

Setting the date and time

14
Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Þ
Date/Time
Date:
31.01.2009
Time:
00:00
Back
¤
Enter the hours and minutes in 4-digit
format via the keypad,
e.g., QM 5 for 07:15 am.
Change the input position with
the control key if necessary.
¤
Press the key below
play screen to open the input field.
Time
(If you have already set the time and
date, open the input field via the menu
¢
page 25.)
The Date/Time submenu is shown on
the display.
¤
The active input position flashes. Enter
day, month and year as an 8-digit
number via the keypad,
e.g., 4 Q2QQ
O for 14/10/2009.
Save
Press the right or left control key
to change the input position and
correct an entry.
¤
Press down on the control key to switch
to the time input field.
§Time§
on the dis-
Date/Time
Date:
14.10.2009
Time:
00:00
Back Save