Siemens Gigaset S400 professional Bedienungsanleitung Seite 104

Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / direct_charges.fm / 06.07.2011
Using the directory and lists
Copy Entry
to Internal: Send a single entry to a hand-
¢
set (
vCard via Bluetooth: Send a single entry
in vCard format via Bluetooth.
Delete All
Delete all entries in the directory.
Copy All
to Internal: Send the complete list to a
handset (
vCard via Bluetooth: Send the complete
list in vCard format via Bluetooth.
Available Memory
Display the number of entries that are still
available in the directory (
Using quick dial keys
¤
Press and hold the required quick dial key
¢
( page 46).
Transferring the directory to
another handset
Prerequisites:
u
The sending and receiving handsets must
both be registered to the same base.
u
The other handset and the base can send
and receive directory entries.
¢
s s (Select entry)
¢
§Options§
¢
Copy All
s
You can transfer several individual entries
one after the other by responding to the
Entry copied - Copy next entry? prompt
§Yes§
with .
A successful transfer is confirmed by a mes-
sage and confirmation tone on the receiving
handset.
Please note:
u
Entries with identical numbers are not
overwritten on the receiving handset.
30
page 30).
¢
page 30).
¢
page 28).
¢
(Open menu) Copy Entry /
to Internal
Select the internal number of
the receiving handset and press
§OK§
.
u
The transfer is cancelled if the phone
rings or if the memory of the receiving
handset is full.
u
Pictures and sounds assigned to entries
are not transferred.
Transferring the directory as a
vCard with Bluetooth
¢
In Bluetooth mode ( page 44), you can
transfer directory entries in vCard format,
e.g., to exchange entries with your mobile
phone.
¢
s s (Select entry)
¢
(Open menu) Copy Entry / Copy All
¢
vCard via Bluetooth
The list of "Known Devices " (
displayed.
s
Select device and press
Receiving a vCard with Bluetooth
If a device from the "Known Devices " list
¢
( page 45) sends a vCard to your handset,
this occurs automatically. You are informed
about it via the display.
If the sending device does not appear in the
list, you will be asked on the display to enter
the device PIN for the sending device:
~
Enter the PIN for the sending
Bluetooth device and press
The transferred vCard is available as a direc-
tory entry.
¢
§Options§
¢
page 45) is
§OK§
.
§OK§
.