Setting Pauses; Switching Temporarily To Tone Dialling (Dtmf) - Siemens Gigaset S400 professional Bedienungsanleitung

Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / pabx.fm / 06.07.2011

Setting pauses

Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key c
and sending the number.
v
*#Q5# L
~
Change pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
*#Q5# 2
~
Changing a dialling pause (pause
after access code)
Prerequisite: You have saved an access code
¢
( page 54).
v
*#Q5#
~
To insert a dialling pause: press and hold
S for 2 seconds. A P appears in the dis-
play.
Open the main menu.
Press keys.
Enter number for the length of
the pause (1 = 1 sec.; 2 = 3 secs.;
§OK§
3 = 7 secs.) and press
Open the main menu.
Press keys.
Enter a number for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms) and
§OK§
press .
Open the main menu.
Press keys.
Enter number for the length of
the pause (1 = 1 sec.; 2 = 2 secs.;
3 = 3 secs.; 4 = 6 secs.) and press
§OK§
.
Connecting the base to the PABX
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dialling
(PD), but you need tone dialling for a con-
nection (e.g., to listen to the network mail-
box), you must switch to tone dialling for the
call.
Prerequisite: You are conducting a call or
have already dialled an external number.
*
After the call ends, pulse dialling is automat-
ically activated again.
.
Press the star key.
55