Protecting Against Unauthorised Access; Changing The System Pin; Resetting The Base To The Factory Settings - Siemens Gigaset S400 professional Bedienungsanleitung

Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / registr_sett.fm / 06.07.2011
•
Protecting against
unauthorised access
Protect the system settings of the base with
a PIN known only to yourself. The system PIN
must be entered when, for example, regis-
tering/de-registering a handset to/from the
base or when restoring the default settings.

Changing the system PIN

You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN known only by you.
Ï
¢
v
~
~
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN set to 0000.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the factory settings.
¢ ¢
System System PIN
Enter the current system PIN
§OK§
and press .
Enter your new system PIN and
§OK§
press .
•
Resetting the base to the
factory settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered
u
Eco Mode is activated and Eco Mode+ is
deactivated,
u
The system PIN is not reset.
Ï
¢ ¢ ¢
v
System
~
Enter the system PIN and
§OK§
press .
§Yes§
Press the display key.
Setting the base
Base Reset
53