Connecting The Headset; Connecting The Usb Data Cable - Siemens Gigaset S400 professional Bedienungsanleitung

Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / starting.fm / 06.07.2011
First steps

Connecting the headset

Connecting the USB data cable

16
You can connect a standard USB data cable with a mini-B connector to the back of
your handset to connect the handset to a PC (
¤
Remove the belt clip (if attached)
¢
( page 12).
¤
Remove the battery cover (
¤
Connect the USB data cable to
1
USB socket .
Please note
Please connect your handset directly to
the PC; do not connect via a USB hub.
After removing the plastic cover, you can connect a head-
set to the left-hand side of your telephone with the 2.5 mm
jack connector.
The headset volume corresponds to the settings for the
¢
handset volume ( page 48).
After using the headset, replace the plastic cover to enable
optimum sound in speaker mode.
¢
¢
page 11).
page 60).
1