Restoring The Handset Default Settings; Setting The Base; Activating/Deactivating Music On Hold; Repeater Support - Siemens Gigaset S400 professional Bedienungsanleitung

Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / registr_sett.fm / 06.07.2011

Setting the base

Example:
Area Codes
International code:
00 - 49
Local area code:
0 - [ ]
Û
•
Restoring the handset
default settings
You can reset individual settings and
changes that you have made.
The following settings are not affected by a
reset:
u
Registration to the base
u
Date and time
u
Entries in the calendar
u
Entries in the directory, the call lists and
the content of the resource directory
Ï
¢
v
§Yes§
52
Save
¢ ¢
System Handset Reset
Press the display key.
Setting the base
The base settings are carried out using
a registered Gigaset S4 professional
handset.
•
Activating/deactivating
music on hold
Ï
¢ ¢
v
Audio Settings
¢
Music on hold
§Change§
Press to activate or deactivate the
music on hold (³ = on).
•

Repeater support

With a repeater, you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will ter-
minate any calls that are in progress at the
time.
Prerequisite: A repeater is registered.
Ï
¢ ¢ ¢
v
System
§Change§
Press to activate or deactivate
repeater mode (³= on).
After activating or deactivating the
repeater, switch your handset off and
¢
on again (
page 21)
Please note
u
Eco Mode / Eco Mode+ (
and repeater support cancel each
other out, i.e., if you use a repeater,
you cannot use Eco Mode or Eco
Mode+.
u
Encrypted transmission activated at
the factory is deactivated when a
repeater is registered.
Repeater Mode
.
¢
page 37)