Using The Phone; Control Key - Siemens Gigaset S400 professional Bedienungsanleitung

Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / starting.fm / 06.07.2011

Using the phone

Using the phone

Control key

18
Below, the side of the control key that you must press in the
respective operating situation is marked in black (top, bottom,
right, left, centre), e.g., v for "press right on the control key" or
w for "press the centre of the control key".
The control key has a number of different functions:
When the handset is in idle status
s
Open the directory.
v
Open the main menu.
u
Open the list of handsets.
t
Call up the menu for setting the handset's call volume (
In the main menu
t, s, v or u
Navigate to the required function.
In submenus and lists
t / s
Scroll up/down line by line.
In input fields
Use the control key to move the cursor up t, down s, right v or left u. Press
and hold v or u to move the cursor word by word.
During an external call
s
Open the directory.
u
Initiate an internal consultation call.
t
Adjust the loudspeaker volume for earpiece and speaker mode.
Functions when pressing the middle of the control key
Depending on the operating situation, the key has different functions.
u
In idle status the key opens the main menu.
u
In submenus, selection and input fields, the key takes on the function of the
§OK§ §Yes§
display keys ,
Please note
These instructions demonstrate the main menu being opened by pressing the
right of the control key and functions being actuated by pressing the appropri-
ate display key. However, if you prefer, you can use the control key as described
above.
§Save§ §Select§ §Change§
, , or .
¢
page 48).