Technical Parameters - Valeo beep&park Gebrauchsanweisung

Technical Parameters

•
Rated voltage: from 9 to 16 V
•
Beep volume : 70 ~ 90dB
•
Detecting range: 0�10 ~ 1�5 m
•
Working current: < 300 mA
•
Operation temperature: - 40°C ~ + 85°C
•
Homologation: E-mark, CE and ROHS
4
Caution
•
It is recommended that installation is carried out by an
approved professional auto technician�
•
It is strongly advised to check the position of the sensors
before the definitive drilling of the holes.
•
You may have to replace the adapter ring (included in
the kit) around the sensor in order to obtain the required
inclination in the range of +/- 5° after installation on the
vehicle bumper�
•
On metal bumpers, you must sometimes add insulating
rings around the sensors to fit them on the bumper, in
order to avoid sensor vibration�
•
Valeo beep&park® helps provide assistance when
reversing and parking� Driving skills, such as slowing
down, use of mirrors etc� are always essential�
•
Blocked sensors are preventing the system functioning
correctly� Make sure that the sensors are not covered
with mud, snow or ice, for example�