Technical Parameters - Valeo speed visio Gebrauchsanweisung

Caution
•
It is recommended that installation is carried out
by an approved professional auto technician.
•
This product can only be installed inside the car.
The speed adjustment settings must not be made
while driving.
•
The battery must be disconnected before
installation, which means that certain stored
data, e.g. radio settings, will be lost.
•
Please make sure that the display cannot harm
passengers in case of accident and that it is not
in the driver's line of vision.
•
Keep the cable away from high temperatures and
movable areas before connecting the wires, to
avoid it melting from heat or short circuits.
•
The display should not be installed within the
operating range of the airbag.
•
The display is for reference purposes only.
Please drive according to the indications given
by the vehicle's originally equipped instruments.
 
Features
•
The head-up display (HUD) registers the speed signal,
transmits it to the central unit, and displays the data on
the windshield. This way the driver can always remain
concentrated on the road.
•
The system warns the driver vocally in case of speeding,
depending on the speed threshold registered.

Technical Parameters

•
Dimensions: 78 x 48 x 19 (L x W x H)mm
•
Operating Voltage: DC10V~DC15V
•
Power Consumption: 350mA
•
Max. Brightness: 5500 cd/m² (Brightness can be
adjusted according to the ambient light source)
•
Operating Temperature: -20°C ~ +85°C