Valeo beep&park Gebrauchsanweisung Seite 6

The system indicates a defective sensor (the buzzer
3
beeps 3 times):
1.
Check whether the sensor surface is clean�
2. Check whether the sensor wires are plugged in the
ECU properly�
3. Check whether the sensor wires are damaged or not�
4. Check that the sensor is not damaged�
6
If the problem persists, please follow these steps:
1. Contact the dealer where you purchased the
product�
2. Replace the product ECU and recheck the system�
3. Test the sensors with certified ECU.
4. Plug certified sensor into the ECU and recheck.
51