Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
v
Make a connection
Video output connection
The video output connector is connected to the monitor or
other system devices with a coaxial cable (locally pro-
cured).
The maximum extensible length is shown in the table.
Type of coaxial cable
Recommended
maximum cable
m
length
Power connection
Caution:
• The following connections should be made by qualified
service personnel or system installers in accordance
with NEC 725-51.
• Wire colors & functions
Camera power cord
<WV-CW384>
Wire Color
24 V AC
Brown
24 V AC (L)
Blue
24 V AC (N)
Green/Yellow
To GND
<WV-CW380>
Wire Color
Brown
220 V to 240 V AC (L)
Blue
220 V to 240 V AC (N)
Green/Yellow
To GND
Cautions:
• Be sure to connect the GND (grounding) lead of the
camera and grounding terminal of the power supply
when using a 24 V AC (WV-CW384) or 220 V to 240 V
AC (WV-CW380) power source.
• Shrinking the cord-entry seal is a onetime procedure.
Do not shrink the cord-entry seal until it has been ascer-
tained that unit is functioning.
14
Power cord (WV-CW384: Approx. 72 cm,
WV-CW380: Approx 165 cm)
Video output cable
(WV-CW384: Approx. 72 cm
WV-CW380: Approx. 72 cm)
RG-59/U
RG-6/U
RG-11/U
(3C-2V)
(5C-2V)
(7C-2V)
250
500
600
12 V DC
Positive
Negative
To GND
BNC connector
• ONLY CONNECT THIS TO 24 V AC or 12 V DC CLASS
2 POWER SUPPLY.
• To prevent fire or electric shock hazard, the UL listed
wire VW-1 style 1007 should be used for the cord for
Input Terminals.
• Do not use a transformer larger than 10 VA.
RG-15/U
(10C-2V)
Cord length and wire gauge
<WV-CW384>
800
24 V AC
The recommended cord length and copper wire size are
shown in the table for reference.
The voltage supplied to the camera should be between
19.5 V AC and 28 V AC.
Recommended wire gauge for 24 V AC line.
Copper wire
size (AWG)
Wire length
(Approx.)
12 V DC
The recommended resistance and copper wire size are
shown in the table for reference.
The voltage supplied to the camera should be between
10.5 V DC and 16 V DC.
Resistance of copper wire [at 20 °C]
Copper wire
size (AWG)
Resistance (Ω/m)
"L", "R", "V
", and "I" shall satisfy the inequality below.
A
10.5 V DC ≤ V
L :
Cord length (m)
R :
Resistance of copper wire (Ω/m)
V
: DC output voltage of power supply unit
A
I :
DC current consumption (A). See the specification.
Important:
• When using 12 V DC power supply, the heater is
unavailable.
• To 24 V AC or 12 V DC power
supply (WV-CW384)
Brown (Live)
• To 220 V to 240 V AC power
Blue (Neutral)
supply (WV-CW380)
Green/Yellow (GND)
To GND
* When using 12 V DC power supply,
the heater is unavailable.
BNC connector
BNC connector
To VIDEO IN
#24
#22
2
2
(0.22 mm
)
(0.33 mm
)
(0.52 mm
m
20
30
#24
#22
2
2
(0.22 mm
)
(0.33 mm
)
(0.52 mm
0.078
0.050
- 2(R x I x L) ≤ 16 V DC
A
#20
#18
2
2
)
(0.83 mm
)
45
75
#20
#18
2
2
)
(0.83 mm
)
0.03
0.018
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
