About Setup Menus - Panasonic WV-CW384E Bedienungsanleitung

About Setup Menus

Before operation, setup of this camera is required. On the setup menu, you can check current settings and perform settings to
meet requirements.
The following is an example of setup procedure when "LANGUAGE" is set to "ENGLISH".
Settings items of the camera setup page
Setup item
CAMERA Configure the settings relating to camera operations
CAMERA ID The camera title can be edited and displayed on the screen.
ALC Configure the light control method.
SHUTTER Select the shutter speed.
AGC Select the method of the gain adjustment.
SENS UP Adjust the sensitivity.
SYNC Configure the method of the synchronization.
WHITE BAL Select the method of the white balance adjustment.
MOTION DET Configure the settings for the motion detection function.
DNR Configure the settings for the DNR (Digital Noise Reduction) function.
RESOLUTION Select a horizontal resolution mode.
BW MODE Configure the settings relating to the BW mode such as the settings for switching
between the color mode and the BW mode.
PRIVACY ZONE It is possible to mask a designated zone and as a privacy zone.
EL-ZOOM Adjust the electronic zoom.
STABILIZER Select "ON" or "OFF" to determine whether or not to use the image stabilizer to pre-
vent shaky images.
LED Performs the settings for LED.
BACK-FOCUS Select the method of the flange-back (back focal) length adjustment and adjust the
flange-back (back focal) length minutely.
SPECIAL
CHROMA GAIN Adjust the chroma level (color density).
AP GAIN Adjust the aperture level.
PEDESTAL Adjust the pedestal level (brightness).
PIX OFF Correct image defects such as scratches.
CAMERA RESET Reset the settings of setup menu to the default settings.
SER.NO. Check the serial number of this camera.
LANGUAGE Select the language to display the setup menu.
Description
Reference
Pages
23
24
25
26
26
26
27
27
29
29
29
30
30
31
31
31
32
32
32
32
32
33
33
23
21