Functional Description; Technical Data; Safety Precautions - FLORABEST FLV 1200 B1 Originalbetriebsanleitung

GB IE

Functional description

The verticuttor and lawn aerator has two
easily exchangeable work cylinders:
An aerator cylinder made of hard plastic
with vertically rotating sprung tines, and a
verticutor cylinder with vertically mounted
high-grade steel knives.
The implement features a high-quality
plastic case with collection bag and a
handle bar with a folding function. Please
refer to the subsequent descriptions for the
actual functions of the individual control
elements.

Technical data

Motor input ..............................1200 W
Rated voltage ...........230-240 V~, 50 Hz
Protection Class ...............................
Degree of protection ....................... IPX4
Rotating speed of the tool
(no) .......................3600 min
Cylinder width .............................31 cm
Readjustment range for wear...........9 mm
Volume collection bag ......................30 l
Weight .......................................9.8 kg
Acoustic pressure level
(L ) ..............85.7 dB (A); K
pA
Sound power level (L
Measured ..99.5 dB (A); K
Guaranteed ....................... 103 dB (A)
Vibration (a ) ...3.108 m/s
n
The noise and vibration values were
established by the standards and
stipulations listed in the Conformity
Declaration.Technical and visual changes
can be completed in the course of
further development without notication.
Consequently,all dimensions, references
and details in these Operating Instructions
are without guarantee. Consequently
legal claims based on these Operating
Instructions cannot be asserted.
6
-1
(r.p.m)
= 3 dB(A)
pA
)
wA
= 2.49 dB (A)
wA
2
; K= 1.5 m/s
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at
protecting the user should be based
on estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be considered,
including, for example, times during
which the power tool is turned off
II
and times when the tool is turned on
but is running idle).

Safety precautions

This section covers the basic
safety instructions when
working with this implement.
2