Freeze Prevention During Winter; Changing Batteries Of Remote Control - Invacare Aquatec Pure Bidet Gebrauchsanweisung

Cleaning the water strainer
B
A
1. Close the water supply by turning the shut off valve
clockwise.
2. Detach the PVC flexible hose A from the inlet adapter
B.
3. Detach the strainer C from the inlet adapter with a
pointed object.
4. Thoroughly clean the strainer with a soft brush.
5. Reinsert the strainer on the inlet adapter.
6. Attach the PVC flexible hose to the inlet adapter.
7. Open shut off valve fully by turning counterclockwise.
Cleaning the nozzles
A
1590625-B
1. Press "CLEANSING / STOP" and "POWER SAVING"
2. Clean the nozzle manually with a soft brush.
3. Press "CLEANSING / STOP" button.
C
Disinfecting the shower toilet
1. Disinfect the product by wiping down all generally
2. Thoroughly wipe clean the treated surfaces with a damp
3. Thoroughly dry the surfaces with a clean, dry cloth.

7.3 Freeze prevention during winter

1. Connect the power plug and check if the power unit
2. Press WATER on the remote control, until the water

7.4 Changing batteries of remote control

The battery life cycle depends on the frequency of use.
buttons simultaneously on the control panel.
• The nozzle A comes out and stops.
• The nozzle returns to its storage position and the
self cleaning function is automatically activated.
accessible surfaces with commercially available
disinfectants.
cloth.
is on.
temperature is set to "Low" or higher,
see 5.3 Using the shower toilet, page 18.
Maintenance
25