Troubleshooting - AAT Servo Originalbetriebsanleitung

Problem
SERVO cannot be turned on
SERVO does not drive
Battery pack don't charge
Impairment of the driving charac-
teristics (e.g. increased resistance
to rolling)
Check and potential solution
Is the interface connected?
No? Connect it.
Is the battery pack empty?
Yes? Charge it.
Is the battery pack in driving mode?
No? Go into driving mode.
Problem still there?
Yes? Contact the manufacturer or authorized
personnel!
Is the charger still plugged in?
Yes? Unplug it.
Is the SERVO still turned on?
No? Turn it on.
Are powered wheels locked?
No? Lock them.
Problem still there?
Yes? Contact the manufacturer or authorized
personnel!
Is the charger connected?
No? Connect it properly.
Problem still there?
Yes? Contact the manufacturer or authorized
personnel!
Did you check the air pressure?
No. Please check and refill air if necessary.
73
Problem still there?
Yes? Contact the manufacturer or authorized
personnel!
GB

7.3 Troubleshooting