AAT Servo Originalbetriebsanleitung Seite 71

Malfunction, control unit
Code Malfunction
01 Keypad
02 Not engaged
03 Serial number
04 Parameter data
05 Software sequenz
06 Wrong command
71
Troubleshooting
Contact manufacturer or authorized
personnel!
Contact manufacturer or authorized
personnel!
Turn off the SERVO, wait for 10 sec.
turn on the SERVO!
Malfunction still present?
Yes: Contact manufacturer!
Turn off the SERVO, wait for 10 sec.
turn on the SERVO!
Malfunction still present?
Yes: Contact manufacturer!
Turn off the SERVO, wait for 10 sec.
turn on the SERVO!
Malfunction still present?
Yes: Contact manufacturer!
GB