Proklima GPC12AJ Bedienungsanleitung Seite 55

Introduction for buttons on remote controller
Note:
● This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model doesn't have, if press
the corresponding button on the remote controller that the unit will keep the
original running status.
● After putting through power, air conditioner will give out a sound and operation
indicator " " is ON (red indicator). You can operate the air conditioner through
the remote controller.
● At ON status, after each pressing button on remote controller, the signal icon "
indicates the signal has been sent to air conditioner.
● At OFF status, display screen on remote controller displays set temperature.
At on status, display screen on remote controller displays the corresponding startup
function's icon.
1
ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the unit,
operation indicator "
ent for different models)and indoor unit gives out a sound.
2
MODE button
Press this button can select your required operation mode.
● After selecting auto mode, air conditioner will operate automatically according to
ambient temperature. Set temperature can't be adjusted and also can't be displa-
yed. Press "FAN" button can adjust fan speed. Press "
angle.
● After selecting cool mode, air conditioner operates under cool mode. Cool indicator
" " on indoor unit is ON. You can press "+" or "-" button to adjust set temperature.
Press "FAN" button can adjust fan speed. Press "
angle.
● After selecting dry mode, air conditioner operates under dry mode at low speed.
Dry indicator "
justed. Press "
● After selecting fan mode, air conditioner operates only under fan mode, All mode
indicators on indoor unit is OFF. Operation indicator is ON. Press "FAN" button can
adjust fan speed. Press
● After selecting heat mode, air conditioner operates under heat mode. Heat indicator
" " on indoor unit is ON. You can press "+" or "-" button to adjust set temperature.
Press "FAN" button to adjust fan speed. Press "
(Cooling only unit can't receive the signal for heating mode.)
" on indoor unit is ON (green indicator. Color may be differ-
AUTO COOL
" on indoor unit is ON. Under dry mode, fan speed can't be ad-
" button to adjust swing angle.
" " button to adjust swing angle.
DRY FAN
" button to adjust swing angle.
53
HEAT
" button can adjust swing
" button can adjust swing
"