Magnescale LY71 Handbuch Seite 46

4. Settings
Setting contents
Display Setting item
Master
calibration
Input axis
Destination
country
Measuring unit
resolution
12
(E)
Available options
(Factory setting)
(Factory setting)
(Factory setting)
(Factory setting)
: Linear scale 0.1 µm
: Linear scale 0.5 µm
: Linear scale 1 µm
: Linear scale 5 µm
: Linear scale 10 µm
: Rotary scale 1 s
: Rotary scale 10 s
: Rotary scale 1 min
: Rotary scale 10 min
<Expanded selection options are
shown below>
: Linear scale 0.05 µm
: Linear scale 2 µm
: Linear scale 20 µm
: Linear scale 25 µm
: Linear scale 50 µm
: Linear scale 100 µm
: Rotary scale 1 degree
Remarks
Master calibration function not
used.
Master calibration function used.
* See "2-15. Master Calibration"
in the Operating Manual.
First axis only used.
First and second axes used
independently.
(Not available when using the
comparator)
First and second axes used with
addition/subtraction.
Standard (mm display; inch
display possible)
U.S. (inch display; mm display
possible)
Japan (mm display only)
* Select the appropriate unit of
measurement.
Set to match the measuring unit
resolution.
Measuring unit output
A
B
Minimum resolution
The displays for inputs 1, 2, and
3 of the measuring unit are fixed
regardless of the settings for the
display axis and display data at
power ON (see "4-2. Advanced
Settings").
Expanded selection options are
made available by pressing the
key.
LY71