Technical Parameters; Environment Protection - GRAPHITE 59G824 Betriebsanleitung

RATED PARAMETERS
Supply voltage
Input current frequency
Rated power
Cutting blade rotational speed (no load)
Outer diameter of cutting blade
Inner diameter of cutting blade
Protection class
Weight
Year of production
Bevel cutting range
Maximum thickness of cut material
Work table width
Work table length
Height of the work table from ground
Bevel cutting range
Mitre cutting range
Cutting capacity for angle / bevel
cutting
Height of the work table from ground
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp = 92.6 dB(A) K = 3 dB(A)
A
Sound power: Lw = 105.6 dB(A) K = 3 dB(A)
A
Do not dispose of electrically powered products with household wastes, they should be utilized in
proper plants. Obtain information on wastes utilization from your seller or local authorities. Used up
electric and electronic equipment contains substances active in natural environment. Unrecycled
equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.

TECHNICAL PARAMETERS

Flip Over Saw
Parameter
Table saw mode
Right angle
At 45º angle
Mitre saw mode
0
0
45
0
45
0
0

ENVIRONMENT PROTECTION

33
Value
230 V AC
50 Hz
1400 W
5000 rpm
216 mm
30 mm
25 kg
2014
0° ÷ 45°
55 mm
45 mm
390 mm
450 mm
740 mm
0° ÷ 45°
± 45º
0
x 0 60 x 125 mm
0 x 0 0 60 x 80 mm
0
x 45 40 x 100 mm
0
x 45 40 x 125 mm
700 mm
II