Introduction; Intended Use; Features; Package Contents - Parkside PTS 500 A1 Originalbetriebsanleitung

PLUNGE SAW PTS 500 A1

Introduction

Congratulations on the purchase of your
new appliance. You have selected a high-
GB
quality product. The operating instructions
are part of this product. They contain important in-
formation on safety, usage and disposal. Before
using the product, familiarise yourself with all hand-
ling and safety guidelines. Use the product only as
described and for the range of applications specified.
Please also pass these operating instructions on to
any future owner.

Intended use

The appliance is primarily designed for sawing
longitudinal and cross cuts in a plunge saw cut into
firmly supported solid wood, chip board, plywood,
aluminium, tiles, stone, plastics, and lightweight
construction materials. Please note that the pre-
assembled saw blade is only suitable for use with
wood. Any other usage of or modification to the
appliance is considered improper and carries the
risk of serious personal injury. Not for commercial
use.

Features

Mechanical plunge lock
Power On / control lamp
Power cord
Ventilation slits
Cover for carbon brushes
ON / OFF switch
Cutting depth setting
7a Dial for cutting depth
Markings for cut length
Base plate
Rip fence slot
Rip fence
Screw for rip fence
11a
Viewing window for cutting line
Connection to dust extraction
Spindle lock
Allen key
Saw blade
Clamping flange
16
Clamping screw and washer
Suction hose
HW circular saw blade Z85 / 30
Diamond-coated cutting saw blade Z85VR
HS circular saw blade Z85 / 36

Package contents

1 plunge saw PTS 500 A1
1 HW circular saw blade Z85 / 30
1 diamond-coated cutting saw blade Z85VR
1 HS circular saw blade Z85 / 36
1 rip fence
1 suction hose
1 Allen key
1 carrying case
1 set of operating instructions

Technical data

Nominal power:
Rated voltage:
Idle speed:
Max. cutting depth:
Protection class:
Noise and vibration data:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the power
tool is typically as follows:
Sound pressure level:
Sound power level:
Uncertainty K:
Wear hearing protection!
Weighted acceleration, typically:
Hand/arm vibration a
h
Uncertainty K = 1.5 m/s
500 W
230 V ~ , 50 Hz
n 4500 min -1
0
25 mm
II /
82 dB(A)
93 dB(A)
3 dB
= 2.266 m/s 2
2
PTS 500 A1