4. Weighing with tolerance range
Tare when using a weighing container.
Put on goods to be weighed, tolerance control is started.
Load below specified
tolerance
(example)
• The tolerance control is not active when the weight is under 20d.
• To delete limits, enter "00000 kg".
8.6 Manual totalizing
With this function the individual weighing values are totalized into the sum memory
by pressing
.
No load may be on the loading fork
The system should be stable (stability display „STABLE"
illuminated)
The added-up weighing value must be more than 20d.
• Menu settings:
„F4 Prt" „P Prt"
VFB-BA-e-1811
Load within specified
tolerance
(example)
Load exceeds specified
tolerance
(example)
30