Weighing With Tolerance Range - KERN VFB 2T-3 Betriebsanleitung

8.5 Weighing with tolerance range

You can set an upper or lower limit when weighing with tolerance range and thus
ensure that the weighed load remains exactly within the set limits.
During tolerance controls such as dispensing, portioning or sorting the unit will
indicate whether a value exceeds or falls short of limits with an optical [ok] as well as
an audio signal according to the setting in the menu block "
9.2.
Selectable mode
bP 1
bP 2
bP 3
1. Call up menu
 In weighing mode press
and the first menu block
2. Set limit values
 Keep on pressing
the lower limit
SET LO
 Press
, the current setting will be displayed.
 Press the navigation buttons (see chap. 5.10.1) to enter the
lower limit value, the active digit is flashing.
 Confirm input by
 Select
by pressing
SET HI
 Press
, the current setting for the upper limit will be
displayed.
VFB-BA-e-1811
Description
Acoustic signal turned off
If load is within tolerance range, [ok] will be displayed
and audio signal will be sounded.
If the load is beyond the tolerance range [ok] will be
shown and the audio signal will sound.
und at the same time
will appear.
until the display used for entering
appears.
.
.
"; see chapter

(example)
28