KERN VFB 2T-3 Betriebsanleitung Seite 72

 Press the navigation buttons (see chap. 5.10.1) to enter the
upper limit value, the active digit is flashing.
 Confirm input by
 Press
, the unit will return to the menu
3. How to set tolerance weighing mode
 Press
repeatedly until
 Confirm by
,
 Select
by pressing
BEEP
 Press
, the current setting will be displayed.
 Select desired setting (bp 1, bp 2, bp 3) with
confirm by pressing
 Press
repeatedly; weighing system is in tolerance
weighing mode. From here evaluation takes place whether
the goods to be weighed are within the two tolerance limits.
29
.
is displayed.
will be displayed.
.
(example)
and
VFB-BA-e-1811