Getting Started - Motorola CLP446 Kurzanleitung

68012002086_a.book Page 2 Sunday, December 4, 2011 5:23 PM

GETTING STARTED

1. INSTALL THE BATTERY
• Push up the latch at the bottom of the battery door and lift the battery door off the radio.
• Align the battery contacts with tabs in the battery compartment. Insert the contact side of the battery first, then press the
battery down to secure in place.
Put the battery door back on the radio. Push down the latch to lock.
2. CHARGE THE BATTERY
• Connect the power supply to the drop-in charging tray or multi-unit charger and insert the radio, face down, into the tray. The
light on the charger is red when the radio is charging. It turns to green once the radio is fully charged.
3. CONNECT AN AUDIO ACCESSORY
• Connect a wired audio accessory or pair with a wireless accessory (selected models only).
4. TURN THE RADIO ON
• While wearing the earpiece, press and hold the Power/Battery button until you hear a short tone and the Smart Status Glow
lights up. (To turn off, press and hold the button until you hear a short tone and the Smart Status Glow indicator flashes once.)
English