Motorola CLP446 Kurzanleitung Seite 6

68012002086_a.book Page 4 Sunday, December 4, 2011 5:23 PM
OPERATION OF MENU SETTINGS
Press Menu button to navigate through the Menu settings. At any time in Menu mode, press PTT button briefly or wait 3 seconds to
exit the menu.
HOW TO...
Change Channel
Enter Monitor mode
Enter Scan mode
Access and set up other
features
Quick Tip: It is not necessary to wait for the voice prompt to be completed before continuing with next button press.
For further information, please contact your Motorola Dealer or refer to your specific User Guide available at:
www.motorolasolutions.com/emea/CLP.
ATTENTION
Before using this product, read the RF energy awareness information and operating instructions contained in the Safety and RF
Energy Exposure Booklet enclosed with your radio package.
English
STEP 1
Press Menu button to navigate to Channel.
Press Menu button to navigate to Monitor.
Press Menu button to navigate to Scan.
Other features, (such as changing channel frequency and sub-codes, activating voice
scramble, LED pattern options and VOX settings), can be accessed using the CPS
(Customer Programming Software) and programming cable, available as an optional
accessory. Ask your Motorola dealer for more information.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylised M logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and are used under licence.
Press +/- button to change channel.
Press +/- button to activate or deactivate
Monitor.
Press +/- button to activate or deactivate
Scan.
All other trademarks are the property of their respective owners.
STEP 2
© 2011 Motorola Solutions, Inc.
All rights reserved.