Getting Started; Installing The Battery; Connecting Wired Audio Accessory - Motorola CLP446e Bedienungsanleitung

Getting Started

This section helps you to get familiar with the basic operations of the radio.

Installing the Battery

Procedure:
1 At the bottom of the battery door, lift the latch up and remove the battery door of the radio.
2 Align the battery contacts to the tabs of the battery compartment.
3 Insert the end with the battery contacts before pressing the battery down to secure in place.
4 Place the battery door on the radio and push the latch down to lock the battery door.
Figure 2: Battery Installation

Connecting Wired Audio Accessory

Prerequisites: Turn the radio off.
Procedure:
1 Plug the audio accessory into the radio with the unlock icon on the audio accessory facing the
front of the radio.
Ensure the indicator on the audio accessory and the radio is aligned.
2 Turn the audio accessory plug until the lock icon on the plug is facing the front of the radio and
the indicators are aligned.
MN006181A01-AA
Getting Started
13