Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Firmware Setpoint Settings
Item
Description
TCSP
Filter time setting
PM2.5
PM2.5 setpoint
SP
CO2 SP CO
setpoint
2
T SP
Temperature setpoint
T SP H Temperature setpoint
range high
T SP L Temperature setpoint
range low
VOC SP VOC setpoint
HUM
Humidity setpoint
SP
P81
Device address (KNX
1)
only)
1)
P81 is only for ETS and local HMI does not support P81:
·
During powering up, there is a startup delay (TwaitDevice = tWaitMin +
DeviceAdr * 200ms) before the processing signal is processed.
·
When P81=255(default), the device does not process the signal
according to heartbeat and COV mechanism. But it can respond when
another device is polling.
·
The local HMI does not support P81.
·
When individual address is changed via ETS, P81 is updated
automatically after device downloads it from ETS.
22
Range
0...9999
SPML...SPMH
SPCL...SPCH
T SP L...T SP H
Max. of low range...200 (°C)
-50...Min. of high range (°C)
%: 0...100
mg/m
: 0...5
3
0...100 %
1...255
Factory
settings
8760
60
1000
24
50
5
0.6 mg/m
3
6 %
50 %
255
A6V11439451_----_c
or
Werbung
