Seite 1
G3341 RWD32 Installationsanleitung RWD82 Installation Instructions Montage Fitting L ≥ 170 mm (*) Ø 3.2 mm / ≥ 40 mm [mm] ARG62.21 = 150 ARG62.22 = 345 61.5 ARG62.21 ARG62.22 Siemens Building Technologies CE1G3341de,en 04.05.2009...
Seite 2
Βεβαιωθείτε ότι η ηλεκτρική εγκατάσταση τηρεί τους σχετικούς εγχώριους κανονισμούς ασφαλεί- ας. Η καλωδίωση πρέπει να ακολουθεί το διάγραμμα της εγκατάστασης. Κάθε επαφή σύνδεσης μπορεί να περιλαμβάνει G, G0 = AC 24 V μόνο ένα σύρμα. 04.05.2009 CE1G3341de,en Siemens Building Technologies...
Seite 3
SEL button ( ). Press one of the navi- gation buttons ( ) to go back to PS1 Level. If you do not use Ni1000 sensors, select the PS2 level submenu by pressing SEL button, Siemens Building Technologies CE1G3341de,en 04.05.2009...
Seite 4
The application starts, all sensors will be checked and existing sensors will be high- lighted for future fault status messages. Normal mode display appears with the main sensor value (X1) and relay output status (Q1 and Q2) on display: 04.05.2009 CE1G3341de,en Siemens Building Technologies...
Seite 5
Grundtyp Basic type – – – – – – – – – – – – – – – – – – – Siemens Building Technologies CE1G3341de,en 04.05.2009...
Seite 6
MAXPRIOR XP-h / XP-r Maximalvorrangfunktion gekehrt) Minimalgrenzwert Begrenzungsfunktion Proportionalband für XP-c / XP-d Kühlsequenz (/ direkt) Q1 ON Q1 eingeschaltet Pt 1000 Fühler Proportionalband für 3- XP3P Relative Begrenzung Punkt-Stellantrieb Sollwert- Komfortbetrieb Ferneinstellung Economybetrieb Schaltdifferenz 04.05.2009 CE1G3341de,en Siemens Building Technologies...
Seite 7
Sensor value units Lowest value for sen- 0…1000 Ω signal sor measuring range Winter change-over Limitation function temperature setpoint Ni 1000 Siemens Neutral zone sensor Proportional band for Maximum value for XP-h / XP-r heating (\ reverse) limitation function...
Seite 8
2009 Siemens Switzerland Ltd 04.05.2009 CE1G3341de,en Siemens Building Technologies...