Before First Use; Automatic Switch-Off; Preparing The Appliance - Silvercrest SWWS 240 C2 Bedienungsanleitung

Before first use

1) Wipe the appliance with a damp cloth both inside and outside
to remove any residual dust left over from transport . Dry it well
so that there is no moisture left in the appliance .
2) Place the appliance on a level and heat-resistant surface . Also
keep in mind that wax splashes may drip onto the surface . The
surface should therefore be easy to clean .

Automatic switch-off

After 60 minutes, the appliance will switch off automatically . After
55 minutes, the control lamp 2 will start flashing to notify you that
the appliance is about to switch off automatically .
The automatic switch-off is not intended as a substitute for removing
the plug from the mains power after use! It is merely a safety feature!
Always remove the plug from the mains power socket when the
appliance is not in use!

Preparing the appliance

Once the appliance is set up on a suitable surface:
1) Remove the wax discs 9 from its packaging .
NOTE
► The only difference between the honey-coloured and the pink
wax beads 9 is the colour .
2) Add the required number of wax discs 9 to the inner bowl 1 .
Use the following standard values as an orientation aid . The values
may vary .
SWWS 240 C2
GB │ IE │ NI │ CY │ 9 ■