Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
3. Position the detector at the height needed and turn the clamp
knob clockwise to secure the clamp on the rod.
4. To make adjustments in height, slightly loosen the clamp,
reposition and retighten.
Detector Cleaning and Storage
•
Dirt and grease may be removed from the exterior of the
detector using a cloth or soft, non-metallic brush.
•
The Berner digital laser detector is rain resistant but not
immersible. Do not pour water on the unit or submerge it
under water.
•
The best storage place is one that is cool and dry—away from
direct sunlight and excess heat or cold.
Detector Service
Except for batteries, there are no user serviceable parts in the
Digital Laser Detector. Do not disassemble the unit. Unauthorised
tampering with the laser detector will void all warranties.
Detector Troubleshooting
THE DETECTOR WILL NOT TURN ON
•
Press and release the power button.
•
Check to see that the battery is in place and in the proper
position.
•
If the detector is very cold, allow it to warm up in a heated
area.
•
Replace the 9-volt battery. Turn the unit on.
•
If the detector still does not turn on, take the detector to
a Berner service centre.
THE DETECTOR'S SPEAKER MAKES NO SOUND
•
Ensure that the detector is on.
•
Press the volume button. It will toggle on and off .
•
Ensure that the laser is turned on and that it is emitting a laser
beam.
26
Werbung
Inhaltsverzeichnis
