What The Interpreted Readings Mean; Q Trouble-Shooting; Retrieving Last Recorded Values - Silvercrest Z28414 Bedienungs- Und Sicherheitshinweise

How to use / What the interpreted readings mean / Trouble-shooting
1. Pick the control unit up and make sure that the
time is being displayed.
note: You can leave the control unit in the
scales. Make sure that the metal contact
of the control unit lies precisely on the metal
contact of the scales.
4
2. Press the time / confirmation button
able to get the stored personal data.
3. Press the count-up button
button to get your profile memory.
9
note: When your data profile is displayed, the
LC display will display all your personal settings.
11
4. Press the start button
5. Wait until "0,0 kg", "0,0 lb" or "0:0o st:lb" is
displayed in the LC display
6. Step onto the platform
sure that you are standing on both electrodes
The weight measurement process will now start.
The display will blink 3 times. The weight meas-
ured will be displayed and stored. The LC display
will then display "00.0 000". After that, it
11
will display the measured value three times in
rotation in two groups.
group 1: Calorie requirement
body fat percentage
water percentage

What the interpreted readings mean

Q
LCD display
Meaning too thin
Trouble-shooting
Q
Error display Meaning
h-Lo The control unit batteries are flat.
b-Lo The batteries in the scales are flat.
13
to be
7
or the count-down
8
.
10
.
11
and stand still. Make
3
2
"kcal",
22
in % and body
28
in %.
26
thin normal
group 2: Weight "kg / lb / st:lb"
mass in % and bone mass
30
After the values have been displayed, the time will
automatically be displayed again.

Retrieving last recorded values

Q
note: This function is only available for data
profiles 1 - 12.
1. Make sure that the time is being displayed.
2. Press the start button
the stored readings.
3. Press the count-up button
. button to select your data profile.
9
4. Press the time / confirmation button
wait about 3 - 4 seconds to allow the last stored
readings of the selected profile memory to be
displayed. The readings will be displayed in
rotation in two groups in the LC display
(see "Measuring weight, calorie requirement,
body fat, body water, bone and muscle per-
centages", Point 6.).
overweight
Solution
Change the batteries in line with the
section called "Inserting / replacing
the batteries".
Change the batteries in line with the
section called "Inserting / replacing
the batteries".
, , muscle
20 21
in %.
27
to be able to retrieve
10
or the count-down
8
and
7
11
extremely overweight
GB/CY 11