What The Interpreted Readings Mean; Q Trouble-Shooting; Retrieving Last Recorded Values - Silvercrest Z28414 Bedienungsanleitung

How to use / What the interpreted readings mean / Trouble-shooting
5. Wait until "0,0 kg", "0,0 lb" or "0:0o st:lb" is
displayed in the LC display
6. Step onto the platform
sure that you are standing on both electrodes
The weight measurement process will now start.
The display will blink 3 times. The weight
measured will be displayed and stored.
The LC display
11
After that, it will display the measured value
three times in rotation in two groups.
Group 1: Calorie requirement
body fat percentage
water percentage
Group 2: Weight "kg / lb / st:lb"
mass in % and bone mass
30
After the values have been displayed, the time will
automatically be displayed again.

What the interpreted readings mean

Q
LCD display
Meaning too thin
trouble-shooting
Q
Error display
h-Lo
b-Lo
Err
ErrL
30159_Content_LB5new.indd 39
.
11
and stand still. Make
3
will then display "00.0 000".
"kcal",
22
in % and body
28
in %.
26
, , muscle
20 21
in %.
27
thin normal
Meaning
The control unit batteries are flat.
The batteries in the scales are flat.
The maximum load of 180 kg (400 lb)
has been exceeded.
The body fat percentage measured
is too low or is below the minimum
measurable value of 4.0 %.

retrieving last recorded values

Q
note: This function is only available for data
. profiles 1 - 12.
2
1. Make sure that the time is being displayed.
2. Press the start button
the stored readings.
3. Press the count-up button
button to select your data profile.
9
4. Press the time / confirmation button
wait about 3 - 4 seconds to allow the last stored
readings of the selected profile memory to be
displayed. The readings will be displayed in
rotation in two groups in the LC display
(see "Measuring weight, calorie requirement,
body fat, body water, bone and muscle per-
centages", Point 6.).
overweight
Solution
Change the batteries in line with the
section called "Inserting / replacing
the batteries".
Change the batteries in line with the
section called "Inserting / replacing
the batteries".
Step off the platform
in order to avoid injuries or damage
to property.
–
to be able to retrieve
10
or the count-down
8
and
7
11
extremely overweight
of the scales
3
GB/MT 39
13.07.09 12:57